CPM Rex M4HS
2019-05-23 10:53:12
We are a professional manufacturer of CPM Rex M4HS, we can provide the third party inspection report and datasheet of CPM Rex M4HS as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in CPM Rex M4HS. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: CPM Rex M4HS | Equivalently AISI: M4
CHEMICAL COMPOSITION(CPM Rex M4HS):
C(%) : 1.35
Si (%): 4.25
W(%): 5.75
Mo(%): 4.50
V(%): 4.00
Co(%): —
Other(%): S0.22
Hardness HRC: 64~66
Remark(CPM Rex M4HS):
①, The steel grade suffix HC-->High carbon, HS-->High sulphur.
Introduction Carbon Tool Steel(CPM Rex M4HS)
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion and deformation, and their ability to hold a cutting edge at elevated temperatures. As a result, tool steels are suited for use in the shaping of other materials.
Carbon tool steel has low production cost, convenient raw material source, easy cold and hot working, high hardness after heat treatment, and good wear resistance under low heating condition, so it has been widely applied. Among them, high quality carbon tool steel has high toughness and high degree of finish in grinding. It is suitable for making tools with complex shape and high precision. However, the hardness and wear resistance of this kind of steel decreased rapidly after the working temperature was more than 250 degrees C. This kind of steel has low hardenability and the tool section size is more than 15mm, and the surface layer is high in hardness after water quenching, so it can not be used as a large size tool. The quenching temperature of this kind of steel is narrow, easy to overheat, the distortion and cracking tendency of the quenching is great, and it is easy to produce soft spots.
Application(CPM Rex M4HS)
Tool steels are used for cutting, pressing, extruding, and coining of metals and other materials. Their use, such as the production of injection molds, is essential, due to their resistance to abrasion, which is an important criterion for a mold that will be used to produce hundreds of thousands of moldings of a product or part.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH, NAK80
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, CPM Rex M4HS
Steel Grade: CPM Rex M4HS | Equivalently AISI: M4
CHEMICAL COMPOSITION(CPM Rex M4HS):
C(%) : 1.35
Si (%): 4.25
W(%): 5.75
Mo(%): 4.50
V(%): 4.00
Co(%): —
Other(%): S0.22
Hardness HRC: 64~66
Remark(CPM Rex M4HS):
①, The steel grade suffix HC-->High carbon, HS-->High sulphur.
Introduction Carbon Tool Steel(CPM Rex M4HS)
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion and deformation, and their ability to hold a cutting edge at elevated temperatures. As a result, tool steels are suited for use in the shaping of other materials.
Carbon tool steel has low production cost, convenient raw material source, easy cold and hot working, high hardness after heat treatment, and good wear resistance under low heating condition, so it has been widely applied. Among them, high quality carbon tool steel has high toughness and high degree of finish in grinding. It is suitable for making tools with complex shape and high precision. However, the hardness and wear resistance of this kind of steel decreased rapidly after the working temperature was more than 250 degrees C. This kind of steel has low hardenability and the tool section size is more than 15mm, and the surface layer is high in hardness after water quenching, so it can not be used as a large size tool. The quenching temperature of this kind of steel is narrow, easy to overheat, the distortion and cracking tendency of the quenching is great, and it is easy to produce soft spots.
Application(CPM Rex M4HS)
Tool steels are used for cutting, pressing, extruding, and coining of metals and other materials. Their use, such as the production of injection molds, is essential, due to their resistance to abrasion, which is an important criterion for a mold that will be used to produce hundreds of thousands of moldings of a product or part.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH, NAK80
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, CPM Rex M4HS
The last:
CPM Rex M35HCHS
Next up:
CPM Rex M4