UNS H13450
2019-05-14 10:21:20
We are a professional manufacturer of UNS H13450, we can provide the third party inspection report and datasheet of UNS H13450 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in UNS H13450. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: UNS H13450
CHEMICAL COMPOSITION(UNS H13450):
Hardness HRC|Distance (UNS H13450):
Remark(UNS H13450):
1, When the ω(Pb) is between 0.15% and 0.35%, the steel grade should be added "L" between the second number and the third number.
2, The standard is ASTM A304(1996).
Introduction structural steel (UNS H13450)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS H13450)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS H13450
Steel Grade: UNS H13450
CHEMICAL COMPOSITION(UNS H13450):
C(%) | Si(%)③ | Mn(%) | Cr(%) | Mo(%) | Ni(%) | Other(%) |
---|---|---|---|---|---|---|
0.42~0.49 | 0.15~0.35 | 1.45~2.05 | - | - | - | - |
Hardness HRC|Distance (UNS H13450):
1.6mm | 3.2mm | 4.8mm | 6.4mm | 7.9mm | 9.5mm | 11.1mm | 12.7mm | 14.3mm | 15.9mm |
---|---|---|---|---|---|---|---|---|---|
63~56 | 63~56 | 62~55 | 61~54 | 61~51 | 60~38 | 59~35 | 59~33 | 57~32 | 56~31 |
2, The standard is ASTM A304(1996).
Introduction structural steel (UNS H13450)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS H13450)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS H13450
The last:
UNS H40270
Next up:
UNS H13400