我要啦免费统计

SAE 4161

2018-07-05 17:45:33
We are a professional manufacturer of SAE 4161, we can provide the third party inspection report and datasheet of SAE 4161 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in SAE 4161. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: AISI 4161|SAE 4161|UNS G41610
CHEMICAL COMPOSITION(SAE 4161):
C(%) :       0.56~0.64
Si(%) :      0.15~0.35
Mn(%) :      0.75~1.00
P(%)≤:       0.04
S(%)≤:      0.04
Cr(%) :       0.70~0.90
Ni(%) :       -
Mo(%) :      0.25~0.35
Other(%) :       -
Remark(SAE 4161):
1, The normal cold working carbon steel quality grade of ASTM standard is consult ASTMA108-1999, the chemical component is not different with this table.
2, The special hot working carbon steel quality grade of ASTM standard is consult ASTMA576(90b)(2000), the chemical component is not different with this table.
3, If you ask the Si component, please choose below four options: Si≤0.10%,Si0.10~0.20%,Si0.20~0.40%,Si0.30~0.60%.
4, If you ask the Cu component, it should be under 0.20%.
5, The standard is ASTM A29/29M(1999).

Introduction structural steel (SAE 4161)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(SAE 4161)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.

HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, SAE 4161

Special Steel, Tapping Machine, Cold Heading Machine Supplier in China-Copy Right By Hacer Technology